Buy 1 Bacterial Viral Filter for $3.90 each

Buy 5 Bacterial Viral Filters for $3.50 each

Buy 10 Bacterial Viral Filters for $2.80 each

Universal Inline Bacterial Viral Filter

FEATURES

Viral & Bacterial Filtration Efficiencies of over 99.99+%
Quick & Simple to Install and Replace
Allow for Bi-Directional Airflow
Low Resistance to Gas Flow means that you keep the strong airflow you've come to expect from your CPAP/BiPAP machine
Sonically Sealed -- No Chemical Adhesives

SAFE, EASY AND CONVENIENT: The Inline Bacterial Viral Filter is easy to install and should not require re-calibration on most CPAP machines including those from Respironics, ResMed, Fisher & Paykel, Puritan Bennett, and DeVilbiss. Simply attach it to your machine between the air outlet and your standard CPAP/BiPAP tubing. After that, turn on your machine and experience a steady flow of clean, pure, good tasting air.

These Universal Inline Bacterial Viral Filters are naturally hydrophobic so they allow maximum filtration with a minimum loss of air flow. Each unit is sonically sealed so there are no chemical adhesives or unwanted material residue. Universal Inline BV Filters are easy to install and should not require re-calibration on most CPAP machines. Simply attach the filter to your machine between the air outlet and your standard CPAP tubing. After that, turn on your machine and experience a steady flow of clean, pure, good tasting air.

HEATED HUMIDIFICATION NOTES: Some users find that using in-line Bacterial Viral filters can reduce pressure and therapy effectiveness in humidified CPAP machines. If you experience reduced pressure when using an Inline Bacterial Viral Filter with a humidifier, remove the filter and allow it to dry out completely before re-installing on your system or discontinue use of the Inline Bacterial Viral filter completely.

HEATED TUBING NOTES: Inline Bacterial Viral Filters are generally attached to the CPAP or BiPAP machine's air outlet; however machines that offer integrated heated tubing (i.e. PR SystemOne 60 Series Machines, S9 Machines, AirSense 10 Machines, ICON Machines, etc.) require the tubing to be connected directly to the machine. If you want to use an Inline Bacterial Viral Filter with one of the machines listed above consider attaching the BV Filter at the end of the heated tubing closest to the mask. If that is too bulky for you a FeatherWeight connector tube can be added to move the BV Filter further away from the mask attachment.

AUTO-ADJUSTING MACHINE NOTES: Use of Inline Bacterial Viral Filters may adversely effect auto sensing on Auto-CPAP systems especially at pressures below 7 CM H2O. If your average treatment pressure is below 7 CM H2O Inline Bacterial Viral Filters are not recommended.

MAINTENANCE AND CARE:  The length of use of the bacterial filter varies between users and environments. The filter should be replaced when there is debris seen on the white filter material. It is easy to see the condition of the filter through the clear acrylic globe. Replace the filter when it becomes discolored. If the bacteria filter becomes very dirty or wet, machine performance may be affected.

Heated humidifiers can cause water to collect in the filter chamber, thus clogging the filter and adversely affecting therapy. If wet, remove the filter from the machine and set out to dry. Dry time may vary.

CPAP Supplies - Patient Bacteria Filter